BHA Design and Best Drilling Practices

Day 1:

• Practical Answers to Drilling Hole Issues

• Hole Issues (stuck pipe, lost circulation)

• Cleaning a Hole's Effect on Hole Issues

• Sorts of Stuck Pipe

• Proper Drilling Procedures and Preventative Measures Suggestions for Formation and Related Issues

• Effect of Fishing Equipment on Stuck Pipe Loss and Types

• Resources Used to Address the Issues

• Processes and Suggestions

• Losses in the Reservoir and Outside of It

• A Novel Plug Setup Method to Repair Serious Loss

• How Can the Issue Be Fixed?

Day 2:

• How you can prevent Washouts?

• How do you analyze the true pressure loss of a Washout?

• Bit Selection and Hydraulics Application, including Nozzle Selection

• Bit Types

• Rolling Cutter Bits          

• Polycrystalline Diamond Bits

• Standard Classification of Bits

• Preparing the Bit to be run in Hole

• Running in Hole and Drilling-out Cement and Plugs

• Breaking the Bits

• Fundamental Parameters Discussion

• Optimising Drilling Performance

• Drill-off Test

• Drill String Dynamic / Vibration

• Factors related to Bit Run Termination

• Bit Hydraulic

• BHA and Drill String Design, Selection of Casing Seats, BOP Equipment

• Drill Strings

• Functions of Drill Pipe, Drill Collars and BHA Selection

• Grades of Drill Pipe and Strength Properties

• Thread Types and Tool-joints

• Drill Collar Weight and Neutral Point

• Basic Design Calculations based on-depth to be Drilled

• Functions of Stabilizers and Roller Reamers

Day 3:

• Lifting Capacity of Drilling Fluids, Pressure losses in the Circulating System and ECD

• Functions of the Drilling Fluids, Impact of Hydraulic on the Drilling Optimization

• Parameters affecting on the Drilling Penetrations

• Drilling Fluid Properties, Functions of Drilling Fluid

• Mud Properties and Problems related to Mud Properties

• Seepage Losses Control

Day 4:

• Well Control

• Three Phases of Well Control

• Hydro-dynamic Pressure 

• Equivalent Circulating Density

• Mud Weight Maintenance 

• Second Line of Defense     

• Induced Kick

• Kick Detection Team

• Causes of Kicks while Drilling

• Indication of Induced Kicks

• Diverter Guidelines while Drilling

• Best Kill Procedure for Kick Type

• Kick Control Team

• Removing Gas Trapped below the BOP

• Causes of Kicks while Tripping

• Diverter Guidelines while Tripping

• Evaluating the Off Bottom Kick Condition

• Strip and Bleed Guidelines

• Volumetric Guidelines

• Dynamic Lubricates and Bleed Guidelines

• Third Line of Defense (Underground Blowout)

• Kick Detection in Oil Base Mud

• Operations that can mask a Kick

• Well Control Kill Sheet

• Exercise

Day 5:

• Introduction

• Modern Mud Logging Unit

• Petroleum Engineering Services

• Gas Analysis

• Cutting Evaluation

• Shale Bulk Density

• Shale Factor

• Flow Line Temperature

• Drilling Models

• Petro Physical Measurements

• Drilling Porosity

• Selection a Mud Logging Service

• Drilling problems and How to solve them